您所在的位置:首页 > TBT资讯

IEC颁布医用设备软件-软件的生命周期过程等22项新标准

http://tbt.testrust.com 来源:中国电子技术标准化研究所 时间:2008-05-29

IEC 20065月上旬颁布的新标准目录

(医用设备软件-软件的生命周期过程等22项新标准)

 

标准号

颁布时间

英 文 名 称

中文名称

ISO/IEC 25437

10 May 2006

Information technology - Telecommunications and information exchange between systems - WS-Session - Web Services for Application Session Services

信息技术---系统间的远程通讯和信息交换—WS会话应用会话业务的Web业务

IEC 60034-17

9 May 2006

Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide

旋转电气机械17部分:从转炉反馈时的壳体感应马达

IEC 60880

9 May 2006

Nuclear power plants - Instrumentation and control systems important to safety - Software aspects for computer-based systems performing category A functions

核电站---影响安全的重要仪器和控制系统---基于计算机执行A类功能的系统

IEC 62153-4-6

9 May 2006

Metallic communication cable test methods - Part 4-6: Electromagnetic compatibility (EMC) - Surface transfer impedance - Line injection method

金属通信电缆测试方法---4-6部分:电磁兼容(EMC)---表面传递阻抗---导线注入方法

IEC 62153-4-4

9 May 2006

Metallic communication cable test methods - Part 4-4: Electromagnetic compatibility (EMC) - Shielded screening attenuation, test method for measuring of the screening attenuation as up to and above 3 GHz

金属通信电缆测试方法---4-4部分:电磁兼容(EMC)---屏蔽栅减薄,当减薄到≥3 GHz时的测试方法

IEC 62304

9 May 2006

Medical device software - Software life cycle processes

医用设备软件---软件的生命周期过程

IEC 60917-2-3

9 May 2006

Modular order for the development of mechanical structures for electronic equipment practices - Part 2-3: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Extended detail specification - Dimensions for sub racks, chassis, backplanes, front panels and plug-in units

电子设备用的机械结构的开发用摸指令---2-3部分:分规范---25mm设备实践的接口坐标尺寸---扩展的详细规范---架子、底盘、底版、前面板和插头组件的尺寸

IEC 60335-1-am2

9 May 2006

Amendment 2 - Household and similar electrical appliances - Safety - Part 1: General requirements

修改2---家用和类似电器---安全性---1部分:总要求

IEC 60601-2-13-am1

9 May 2006

Amendment 1 - Medical electrical equipment - Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systems

修改1---医用电气设备---2-13部分:麻醉系统的安全性和基本性能专门要求

IEC 60297-3-104

9 May 2006

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units

电子设备机械结构---482,6 mm (19 in)系列机械结构尺寸---3-104部分:按架子和插头组件接口尺寸配合的连接器

IEC/TRF 60745-2-3

5 May 2006

This Test Report Form applies to IEC 60745 2-3:2006

该测试报告格式适用于IEC 60745 2-3:2006

IEC 61912 Corr.1

5 May 2006

Corrigendum 1 - Application of the short-circuit ratings of low-voltage switchgear and controlgear

勘误表1---低压开关和控制器的短路电流额定值的应用

IEC 61347-2-2-am2

5 May 2006

Amendment 2 - Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps

修改2---灯管控制器---2-2部分:灯丝照明用的直流或交流供电的步降式变压器的专门要求

IEC 60335-2-80-am1

5 May 2006

Amendment 1 - Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans

修改1---家用和类似电器---安全性---2-80部分:风扇专门要求

IEC 60921-am1

5 May 2006

Amendment 1 - Ballasts for tubular fluorescent lamps - Performance requirements

修改1---管状荧光灯用镇流器---性能要求

IEC 61347-2-13

5 May 2006

Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules

管灯控制器---2-13部分:发光二极管的直流或交流供电电子控制器的专门要求

IEC 60838-2-2

关键字:

QQ:2804879579
检测通手机版,微信扫一扫