http://tbt.testrust.com 来源：技术壁垒资源网 时间：2013-05-27
2010年1月22日，南非独立通信管理局(ICASA)发布了《电子通讯设备技术标准法规》。2013年4月16日，ICASA又发布了有关实施该法规的公告。法规及公告中都规定了技术设备和电子通讯设备的ICASA法规符合性标准清单，这些标准主要涉及设备的电磁兼容(EMC)标准、安全标准和性能标准。其中，EMC标准还包括基础EMC标准，通用EMC标准和产品/产品族的EMC标准。表1、表2、表3列出了设备进行ICASA认证的基础EMC标准、通用EMC标准和安全标准。
表1技术设备和电子通讯设备ICASA认证的基础EMC标准
|
设备所述类型
|
适用标准
|
|
Radio disturbance and immunity apparatus - Measuring apparatus
|
SANS 216-1-1[CISPR 16-1-1 ed2.1](CISPR 16 -1 -1 ed3)
|
|
Radio disturbance and immunity apparatus - Conducted disturbances
|
SANS 216-1-2(CISPR 16-1-2 ed1.2)
|
|
Radio disturbance and immunity apparatus - Disturbance power
|
SANS 216-1-3(CISPR 16-1-3 ed2)
|
|
Radio disturbance and immunity apparatus - Radiated disturbance
|
SANS 216-1-4[CISPR 16-1-4 ed2](CISPR 16-1-4 ed3)
|
|
Radio disturbance and immunity apparatus - Antenna calibration test sites for 30 MHz to 1000MHz
|
SANS 216-1-5(CISPR 16-1-5 ed1)
|
|
Method of measurement of disturbances and immunity - Conducted disturbance measurements
|
SANS 216-2-1[CISPR 16-2-1 ed1.1](CISPR 16-2-1 ed2)
|
|
Method of measurement of disturbances and immunity - Measurement of disturbance power
|
SANS 216-2-2[CISPR 16-2-2 ed1.2](CISPR 16-2-2 ed2)
|
|
Method of measurement of disturbances and immunity - Radiated disturbance measurements
|
SANS 216-2-3[CISPR 16-2-3 ed2](CISPR 16-2-3 ed3)
|
|
Method of measurement of disturbances and immunity - immunity measurements
|
SANS 216-2-4(CISPR 16-2-4 ed1)
|
|
Limits for harmonic current emissions (equipment input current <= 6A per phase)
|
SANS 61000-3-2[IEC 61000-16-3-2 ed3](IEC 61000-3-2 ed3.2)
|
|
Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
|
SANS 61000-3-3(IEC 61000-3-3 ed1.2)&SANS 61000-3-3(IEC 61000-3-3 Ed2)
|
|
Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A
|
SANS 61000-3-4(IEC 61000-3-4 ed1)
|
|
Limits Limitations and flicker in low-voltage power supply systems for equipment with rated current greater than 16A
|
SANS 61000-3-5[IEC 61000-3-5 ed1](IEC 61000-3-5 ed2)
|
|
Limits Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - equipment with rated current <= 75A and subject to conditional connection
|
SANS 61000-3-11(IEC 61000-3-11 ed1)
|
|
Electrostatic discharge immunity test
|
SANS 61000-4-2[IEC 61000-4-2 ed1.2](IEC 61000-4-2 ed2)
|
|
Radiated, radio-frequency, electromagnetic field immunity test
|
SANS 61000-4-3[IEC 61000-4-3 ed3](IEC 61000-4-3 ed3. 1)
|
|
Electrical fast transient/burst immunity test
|
SANS 61000-4-4(IEC 61000-4-4 ed2)
|
|
Surge immunity test
|
SANS 61000-4-5(IEC 61000-4-5 ed2)
|
|
Immunity to conducted disturbances, induced by radio-frequency fields
|
SANS 61000-4-6[IEC 61000-4-6 ed2.2](IEC 61000-4-6 ed3)
|
|
General guide on harmonics and interharmonics measurements and instrumentation, forpower supply systems and equipment connected
|
SANS 61000-4-7[IEC 61000-4-7 ed2](IEC 61000-4-7 ed2.1)
|
|
Power frequency magnetic field immunity test
|
SANS 61000-4-8[IEC 61000-4-8 ed1.1](IEC 61000-4-8 ed2)
|
|
Pulse magnetic field immunity test
|
SANS 61000-4-9(IEC 61000-4-9 ed1 1)
|
|
Damped oscillatory magnetic field immunity test
|
SANS 61000-4-10(IEC 61000-4-10 ed1.1)
|
|
Voltage dips, short interruptions and voltage variations immunity tests
|
SANS 61000-4-11(IEC 61000-4-11 ed1)
|
|
Oscillatory waves immunity test
|
SANS 61000-4-12(IEC 61000-4-12 ed2)
|
|
Harmonics and interharmonics including mains signalling at a.c. power port, low frequencyimmunity tests
|
SANS 61000-4-13[IEC 61000-16-4-13 ed1](IEC 61000-4-13 ed1.1)
|
|
Voltage fluctuation immunity test
|
SANS 61000-4-14[IEC 61000-16-4-14 ed1.1](IEC 61000-4-14 ed1.2)
|
|
Test for disturbances in the frequency range 0 Hz to 150 kHz
|
SANS 61000-4-16(IEC 61000-4-16 ed1.1)
|
|
Ripple on d.c. input power port immunity test
|
SANS 61000-4-17[IEC 61000-4-17 ed1.1](IEC 61000-4-17 ed1.2)
|
|
Emission and immunity testing in transverse electromagnetic (TEM) waveguides
|
SANS 61000-4-20[IEC 61000-4-20 ed1.1](IEC 61000-4-20 ed2)
|
|
Unbalance, immunity test
|
SANS 61000-4-27[IEC 61000-4-17 edl](IEC 61000-4-27 ed1.1)
|
|
Variation of power frequency, immunity test
|
SANS 61000-4-28[IEC 61000-4-28 ed1.1](IEC 61000-4-28 ed1.2)
|
|
Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
|
SANS 61000-4-29(IEC 61000-4-29 ed1)
|
|
Power quality measurement methods
|
SANS 61000-4-30[IEC 61000-4-30 ed1](IEC 61000-4-30 ed2)
|
|
Power supply interface at the input to telecommunication equipment Part 1: Operated byalternating (ac) derived from direct current (dc) sources
|
SANS 300132-1(ETS300132-1 V1)
|
|
Power supply interface at the input to telecommunication equipment Part 2: Operated by directcurrent (dc)
|
SANS 300132-2(ETS300132-2 V2.1.2)
|
|
Power supply interface at the input to telecommunication equipment Part 3: Operated byrectified current source, alternating current source or direct current source up to 400 V
|
SANS 300132-3(ETS300132-3 V1.2.1)
|
表2技术设备和电子通讯设备ICASA认证的通用EMC标准
|
设备所述类型
|
适用标准
|
|
Radio disturbance and immunity apparatus - Measuring apparatus
|
SANS 216-1-1[CISPR 16-1-1 ed2.1](CISPR 16 -1 -1 ed3)
|
|
Radio disturbance and immunity apparatus - Conducted disturbances
|
SANS 216-1-2(CISPR 16-1-2 ed1.2)
|
|
Radio disturbance and immunity apparatus - Disturbance power
|
SANS 216-1-3(CISPR 16-1-3 ed2)
|
|
Radio disturbance and immunity apparatus - Radiated disturbance
|
SANS 216-1-4[CISPR 16-1-4 ed2](CISPR 16-1-4 ed3)
|
|
Radio disturbance and immunity apparatus - Antenna calibration test sites for 30 MHz to 1000MHz
|
SANS 216-1-5(CISPR 16-1-5 ed1)
|
|
Method of measurement of disturbances and immunity - Conducted disturbance measurements
|
SANS 216-2-1[CISPR 16-2-1 ed1.1](CISPR 16-2-1 ed2)
|
|
Method of measurement of disturbances and immunity - Measurement of disturbance power
|
SANS 216-2-2[CISPR 16-2-2 ed1.2](CISPR 16-2-2 ed2)
|
|
Method of measurement of disturbances and immunity - Radiated disturbance measurements
|
SANS 216-2-3[CISPR 16-2-3 ed2](CISPR 16-2-3 ed3)
|
|
Method of measurement of disturbances and immunity - immunity measurements
|
SANS 216-2-4(CISPR 16-2-4 ed1)
|
|
Limits for harmonic current emissions (equipment input current <= 6A per phase)
|
SANS 61000-3-2[IEC 61000-16-3-2 ed3](IEC 61000-3-2 ed3.2)
|
|
Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
|
SANS 61000-3-3(IEC 61000-3-3 ed1.2)&SANS 61000-3-3(IEC 61000-3-3 Ed2)
|
|
Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A
|
SANS 61000-3-4(IEC 61000-3-4 ed1)
|
|
Limits Limitations and flicker in low-voltage power supply systems for equipment with rated current greater than 16A
|
SANS 61000-3-5[IEC 61000-3-5 ed1](IEC 61000-3-5 ed2)
|
 
共建单位：
浙江省标准化研究院TBT研究与应对中心
友情链接：中国检验检疫科学研究院 |
中国计量科学研究院 |
中国特种设备检测研究院 |
中国标准化研究院 |
中国认证认可协会 |
中国合格评定国家认可委员会
国家质量监督检验检疫总局 | 中国质量认证中心 | 中国出入境检疫检疫协会 | 中国质量检验协会 | 国家食品安全信息中心 | 日本厚生劳动省 | 世界卫生组织 欧洲食品安全局 | 食品法典委员会 | 英国食品标准局 | 美国食品药品管理局 | 加拿大食品检验局 | 美国化学安全和危害调查局 | 国际标准化组织 澳大利亚标准协会 | 韩国认可认证局 
检测通手机版，微信扫一扫
|
